03/06
3
Starting the System
Switching on the LSM system
•
When set to
ON
the REMOTE CONTROL switch
labeled
System/PC
provides power to the
microscope and the computer. This allows to
use the microscope and the computer without
running the LSM Software (Fig. 1).
•
To switch on the system completely put the
Components
switch also to
ON
. Now the
complete system is ready to be initialized with
the LSM Software.
Switching on the HBO 100 mercury lamp
•
Switch on the HBO 100 mercury lamp via the
switch of the power supply, see operating
manual of the mercury lamp or microscope.
Switching on the Enterprise UV-Ar Laser
•
If the UV laser is required, switch it on via the
toggle switch (Fig. 2/
) of the power supply.
−
It will be ready for operation after a few
seconds.
Fig. 1
REMOTE CONTROL switch
Fig. 2
Power supply of UV-Ar laser