LSM 510
OPERATION IN EXPERT MODE
LSM 510 META
Process Menu
Carl Zeiss
03/06
B 45-0021 e
4-135
4.6.4.3 Formula
Panel
The formulas can be typed in using the keyboard.
•
Click the
Operators
button to open the
permissible operators list.
•
Select the operator(s) from this list (Fig. 4-116)
and click the
Insert
button.
The operators will be inserted into the formula
at the cursor position. By highlighting the
selected operator a description of the function
of this operator is displayed in the lower part of
the operators list.
The calculation works pixel by pixel and starts with
the upper left pixel irregardless of the image size of
the two images or image series.
When choosing images of different data
depth the check box next to
Intensity
range 1…0
should be marked. The
image intensity for all images will then be
normalized to values between 1 and 0.
4.6.5
Copy (Channel)
The
Copy
function permits one channel each of an
existing image to be copied and stored as a new
image.
The selection of Source, Channel and Destination is
made in the same way as in the
Add
function (see
Add
, page 4-129).
4.6.5.1
Open / Close the Copy Window
•
Click on the
Copy
button in the
Process
subordinate toolbar of the
Main
menu.
−
This opens the
Copy
window.
•
Click on the
Close
button to quit the
Copy
window.
4.6.5.2
Performance of the Copy Function
•
Select Source, Channel and Destination and then click on the
Apply
button.
Fig. 4-116
Operators window
Fig. 4-117
Copy window
