Zeiss Lightsheet Z.1, Operating Manual

Page: 323 / 427

CHAPTER 4 - SYSTEM OPERATION
Lightsheet Z.1 Left Tool Area and Hardware Control Tools Carl Zeiss
02/2013 000000-1790-528 153
3.3.18 Processing – Copy
Licensing Instrument

standard optional

LSM

ELYRA

Lightsheet Z.1
Tool accepts all types of image data as input. See full description of tool set for
details.
The Copy function provides means to copy or
duplicate images.
Copy Channel
(Fig. 238) produces a copy of the
selected image.
The first
Select button in the selection panel
selects the active image in the Image Display as
Input Image. The
Channel
selection pull down
menu specifies which channel to copy.
The second
Select button is used to choose a
destination image if the copied channel is to be
added to an existing image document. In the
second
Channel selection pull down menu the
destination channel is specified – or a new image
document can be chosen as destination.
Pressing
Apply starts the copy process.
For Z-Stacks or Time Series, the entire series
for the selected channel is copied.
Duplication
Duplication
creates a new image document which
is a duplicate of the selected input image.
Delete Image
Single images or series of images can be deleted
from the selected image series (input image)
acquired as time series or Z-Stacks or combinations
of those.
The
Select
button selects the active image in the
Image Display as the Input Image to be pro-
cessed.
In the tool-specific settings panel, the parameters
for the interpolation procedure are set.
Fig. 238 Processing – Copy