Zeiss Lightsheet Z.1, Operating Manual

Page: 190 / 427

CHAPTER 4 - SYSTEM OPERATION
Carl Zeiss Introduction to the Software Application Layout Lightsheet Z.1
20 000000-1790-528 02/2013
2.5.1 File
•
In the menu bar, click on
File
.
−
This displays the File menu shown in Fig. 19.
−
The items in this list reflect the standard
windows files menus with the following
exceptions:
New File Browser
will open a ZEN File Browser in
the currently active container (see section 5.3 ZEN
File Browser ).
In the group below New File Browser , it lists the
five last accessed files. Selecting one of the list
entries will open the respective file.
Login displays the Login screen and permits one to
change the operation mode of ZEN, e.g. from
Online (with hardware started) to Offline (Image
Processing or Demo mode), without closing ZEN.
Spectra database starts the dialog used to handle
previously recorded reference spectra. This
function is for LSM systems only.
See also section
5 Right Tool Area, Data
Management and Storage for image file
handling.
2.5.2 Maintain
The Maintain menu from the menu bar contains
additional modules to check and guarantee the
interference-free operation of all the software and
hardware components of laser scanning systems
(LSM).
•
In the Menu bar, click on Maintain .
−
This opens the maintain list (Fig. 20).
The maintain list is bipartite. The upper two
sections list user accessible tools for LSM but not
for Lightsheet Z.1 systems, the lower section lists
tools reserved for service personnel which are
password protected.
Fig. 19 File menu
Fig. 20 Maintain list