Zeiss Lightsheet 7, Installation Requirements

Page: 4 / 22

1 About these Installation Requirements | 1.1 Further Applicable Documents ZEISS
1 About these Installation Requirements
This document describes the location requirements for the installation of the Lightsheet 7, here-
inafter referred to as Microscope System.
It helps to determine a suitable location within facilities and to prepare the location before deliv-
ery of the Microscope System. The suitability of a location depends on various factors such as:
§
Room size
§
Floor stability
§ Environmental conditions
§
Availability of supplies
The room size should be able to accommodate the Microscope System as well as potential acces-
sories and 3rd party systems that may be attached to the Microscope System. For servicing the
equipment, adequate access space is also required. The selected location should conform with the
correct environmental conditions to ensure the safe and ideal operation of the Microscope System
and its application whilst still ensuring the safety and comfort of the operators. Environmental
conditions are often influenced by surrounding installed systems or activities. We can distinguish
between:
§ Vibrations
§
Acoustic noise
§
Room temperature
§
Air quality
The customer is responsible for ensuring that the conditions specified in this document are met
and that the required equipment is available before delivery and installation. A ZEISS service repre-
sentative will gladly assist you in examining the installation conditions and suitable measures.
1.1 Further Applicable Documents
Please take also note of the following documents:
Downloads
Brochures , Safety data sheets, ISO certificates, CSA certificates and EU declarations of conformity
as well as software and firmware updates can be found at https://www.zeiss.com/microscopy/int/
downloads.html or ask your ZEISS Sales & Service Partner.
Local and National
health and safety
regulations
Local and national health and safety regulations should be adhered to for the site and the use of
the Microscope System. Please consult with your ZEISS Sales & Service Partner in the event of
these regulations conflicting with the installation requirements of the Microscope System.
System and 3rd
Party Components,
Accessories
The Microscope System can be configured in many ways. Information about the individual com-
ponents, enhancements and accessories can be obtained from your ZEISS Sales & Service Partner.
Also refer to the 3rd Party documentation of the manufacturer.
4 Installation Requirements ZEISS Lightsheet 7 | en-US | Rev. 1 | 349500-8186-000