Zeiss Humphrey II-i series, User Manual

Page: 469 / 580

Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
EasyConnect RCT 1.0 G-29
10
After all instruments have been configured, the RCT will display a Commit screen ( Figure G.33 )
before sending configuration messages to any instrument. This screen gives you a last chance
to make corrections before committing the specified changes. Select
BACK
to go back to the
previous screen(s) to make any corrections. Selecting
CANCEL
will exit the RCT without
configuring any of the selected instruments.
Figure G.33 Commit Screen
Select the
PERFORM CONNECTION TESTS
checkbox to perform a connection test for each config-
ured setup. Results of these tests will be presented on the Completion screen and a
VIEW TEST
LOG
button will be provided if any instrument failed a connection test.
When you select
NEXT,
all selected instruments will be sent the specified configuration.