Zeiss Humphrey II-i series, User Manual

Page: 360 / 580

Networking
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
14-22
Manually Retrieving Archived Data
You can perform the archive retrievals manually by using the procedures that follow, even if your
Network Administrator has set up automatic archive retrieval.
Note: The retrieve process will not work until you have first archived data to the server. If you have
several HFA II-
i
perimeters in your network, each one must have been archived previously, before
you can retrieve data from all of them.
Performing an Archive Retrieval Manually
1
Select FILE FUNCTIONS >ARCHIVE/RETRIEVE.
2
You will see a dialog like that shown in Figure 14.22 . Select RETRIEVE.
Figure 14.22 Archive/Retrieve Selection Dialog 3
A browser window ( Figure 14.23 ) will open to allow you to select the HFAs you wish to retrieve
data from. The archives are named with the model number and serial number of the HFA II-
i
from which the data was archived ( e.g., 750i-123456). Select the individual HFA II- i archives by
pressing each entry to add a check mark to the left of it. If you make a selection error, press the
entry a second time to de-select it.
Figure 14.23 Database Retrieval Screen
Note: You can select as many HFA II-
i
instruments as you wish, by selecting their individual serial
numbers to place a check mark to the left of each serial number entry.
4
Ensure that you have checkmarked each HFA II-
i
for which you wish to retrieve previously
archived data. You can only manually synchronize the complete series of HFA II-
i
perimeters if
you have selected all of them in the browser screen.