Zeiss Humphrey II-i series, User Manual

Page: 16 / 580

Introduction & Instrument Setup
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
1-8
Protective Packing Symbols
The protective packing symbols on the shipping carton specify the handling requirements and the
transport and storage conditions for the HFA II-
i
as it is shipped from the factory. Note these
symbols in the event that your HFA II- i must be stored for a period of time, prior to its set up and
use.
Instrument Disposition
When it comes time to upgrade the HFA, please contact Carl Zeiss Meditec to inquire about trade-in
or upgrade values we may offer. Should you not wish to trade in the instrument, please see the
Disposal section below.
Disposal
CAUTION: This product contains electronic components. At the end of its lifetime, the
product should be disposed of in accordance with the relevant national regulations.
Disposal of the Product within the European Union (EU)
In accordance with applicable EU guidelines at the time at which the product was brought onto the
market, the product specified on the consignment note is not to be disposed of via the domestic
waste disposal system or communal waste disposal facilities.
For further information on disposal of this product, please contact your local dealer or the
manufacturer or its legal successor company. Please read the latest internet information provided by
the manufacturer.
Where the product or its components are resold, the seller must inform the buyer that the product
must be disposed of in accordance with the currently applicable national regulations.
Handling Requirements Transport and Storage Conditions
Fragile, Handle with Care
Relative Humidity (10% to 100%, including
condensation
Keep Dry
Temperature (-40 to +70 deg. C)
This end up Atmospheric Pressure Limits (500 hPa to 1060 hPa)