Zeiss Humphrey II-i series, User Manual

Page: 12 / 580

Introduction & Instrument Setup
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
1-4
Purpose of This User Manual
Carl Zeiss Meditec designed this User Manual to serve as a training, usage and reference guide.
While we offer training in the use of the HFA II-
i
, we do not offer instruction in diagnostic
interpretation. This manual does not attempt to do so.
To fully appreciate the capabilities of the HFA II-
i
and to develop good testing techniques, we
recommend that you rely on this User Manual as your training and reference guide. It has been
designed to make learning easy. The concise step-by-step instructions and accompanying
illustrations help you get started quickly and with more confidence.
We think you will enjoy working with the HFA II-
i
. The friendly touch control makes it inviting to
learn and easy to operate. For optimum results:
• Read your User Manual in the order written.
• Read it while sitting at the instrument.
• Practice using the HFA II-
i
by first testing staff members, before using it with patients.
Note: HFA II- i series system software Ver. 5.x has updated the style of the user interface without
altering the button locations, functions, and text from the prior software version. This manual
depicts the screens in the prior software style. Regardless of style, text and buttons on screen
images depicted in this manual are identical to those in the Ver. 5.x software screen images.
Model Differentiation
This guide contains instructions for Models 720
i
, 740
i
, 745
i
and 750
i
. Although much of the
information is relevant to all models, some information applies only to particular models. When a
feature or function applies only to specific models, this guide specifies the model number(s), often in
parentheses, in a prominent location. An example of this is found in the discussion of
“SWAP
(Blue-Yellow) Testing (Models 745i and 750i),” on page 1-21 . Conversely, model numbers are not
specified when information is standard or optional on all models. You can find the model number of
your instrument on the rear panel of the HFA II-
i
or you may access this information via the “ i ”
button located in the upper, left-hand corner of the screen (see “The Information Button,” on
page 2-3 ). Refer to Appendix (B), "Product Features,", if you are unsure about the particular
capabilities of your instrument.
Text Conventions
The terms “select,” “choose,” “touch,” and “press” are used interchangeably. Each term means to
initiate an operator action using the touch screen, external keyboard, glidepad, trackball, or mouse.
The terms “hard disk” and “hard drive” are used interchangeably, in reference to the data storage
device standard on all HFA II-
i
models.
UPPER CASE LETTERS are reserved for references to specific command buttons found on the touch
screen. The exceptions to this are messages on test printouts, the words STATPAC, SITA™, SWAP,
HFA II-
i
, and headings.
Italicized words
are used to identify the icon buttons on the right border of the screen, the titles of
figures, pictures, tables, and special notes in this manual.