4
Information About the Sensor
Each configured GOM Scan 1 sensor comprises a defined 3D area in scan
direction within which a measuring object can be scanned.
Such a 3D area is referred to in the following as a “measuring volume”
(MV).
The measuring volume defines the distance of the sensor to the measur‐
ing object.
Info
Depending on the measuring task, different measuring volumes are
required.
Each GOM Scan 1 sensor only has one integrated measuring volume
which cannot be changed.
Each individual measuring volume requires a separate GOM Scan 1 sensor.
4.1
Sensor Configurations
Sensor model
Measuring volume (MV)
(L x W x H) [mm]
Measuring point distance [mm]
Recommended r
ef
er
ence points [Ø mm]
Measuring distance [mm]
Standar
d calibr
ation objects
GOM Scan 1 (400)
400 x 250 x 300
0.129
3
500
CPA50/480
GOM Scan 1 (200)
200 x 125 x 150
0.060
1.5
450
CPA30/210
GOM Scan 1 (100)
100 x 65 x 70
0.037
0.8
400
CPA10/150
Tab. 3: Sensor configurations
0000002121_003_EN_01-09-2021
Page 10 (24)
