Zeiss FixAssist XTR, Operating Manual

Page: 6 / 19

Safety
6
626109-9160-000 FixAssist XTR Operating manual V1.0
2 Safety
2.1 Safety instructions
– The regulations for occupational safety and accident prevention must
be observed.
– Place the probe presetting device on an even, stable and sufficiently
large surface so that it will not tip over.
– Ensure an ergonomic working height.

The user must be able to operate the loading station when in a sitting
or upright position Follow the instructions of the work safety
legislation.
2.2 Structural modifications
No modifications, additions or conversion work may be carried out on
the device without the manufacturer's approval.
Parts must be replaced immediately if not in perfect working order. Only
use original spare and wear parts. If third-party parts are used, it is not
possible to guarantee that they have been designed and manufactured to
the relevant load and safety requirements.