Operation
12
626109-9160-000 FixAssist XTR Operating manual V1.0
4.1
Inserting probe plates
1. Release the red fixing screws
(
1
) and push them out.
1
2. Insert the probe plate with
assembled extension into the
holder. In this process, the
alignment plate (
2
) fits into
the groove (
3
).
The two snaps of the probe
plate move into the recesses
designed to accommodate
them.
2
3
3. Fix down the probe plate.
Push the red fixing screws (
1
)
inwards and tighten them.
Important!
Do not tighten
the fixing screws too much,
because the plate could
become damaged.
The probe plate is clamped in
to the precise position.
1
Fig. 5:
Fig. 6:
Fig. 7:
Summary of Contents for FixAssist XTR
Page 1: ...FixAssist XTR Probe presetting device for probe systems with XTR plate Operating manual...
Page 2: ......
Page 19: ......
