Preparing system for use
Instructions for Use
Preparing system for use
Relocating the system
1.
Turn off the device and
unplug the power
cable.
2.
Fold the system into a
narrow profile, and
tighten all brake knobs.
3.
Unlock all casters.
4.
Move the system to
the desired position
with hands on the
handle (optional).
5.
In case of no handle on
column, put hands on
column and suspension
arm during the move.
6.
Lock all casters once
the system arrives at
the desired location.
CAUTION!
Risk of toppling during transportation of the system!
•
Always hold the stand column at the position marked by the
Transport Position Label (see Section 3.2).
•
Mind the maximum passage height when passing through
doorways. Avoid collisions of any kind.
•
To cross over steps and edges, two persons are needed to jointly
hold and lift the device!
•
Be extremely careful when moving over slopes. Do not park the
stand on slopes.
!
23 / 59
305935-3500-000 – 2.1 – 2017-12-15
