42
Corona process | User Manual
Maintenance
Corona process
7
Removing the lamp holder
Carefully remove the lamp holder of the default lamp
1
upwards. At the
same time, be careful not to touch the light guide
2
lying underneath it.
Note
Several cables run over the lamp holder of the spare lamp.
Therefore, remove the lamp holder of the spare lamp by taking it out
at the side.
Fig. 23
2
1
Removing the lamp holder
8
Removing the old halogen lamp
Place the lamp holder
5
down on a flat surface (as shown in the following
illustration).
Unscrew the three screws
1
from the lamp holder using a TX 10 screwdriver
2
and remove the clamping ring
3
.
Remove the old halogen lamp
4
from the lamp holder.
