Safe operation of the CMM
61211-1310402
CONTURA
2-9
Basic safety instructions
Electric voltage
WARNING
Electric shock on electrical lines in the controller.
Cardiac arrest, burns, and death.
ü
Any work on the controller must be carried out only by a certified
electrician. The cover of the controller may only be removed when
the CMM is out of operation. The following measures need to be
taken for this:
Turn off the drives and the controller.
Remove the power plug as well.
Travel movements
There is a risk of injuries during all travel movements of the CMM. The
speed of the travel movements and the travel direction are irrelevant.
Travel movements take place in the three CMM axes X, Y, Z and during
rotation of a rotary table. Sharp-edged workpieces increase the risk.
WARNING
Risk of injury due to axis movements at high speed and during
rotation of the rotary table axis.
Crushing and severing body parts.
Risk to the eyes caused by the styli. Styli can hurt the eyes during travel
movements if you approach your head close to the workpiece during
probing.
Keep a safe distance to moving parts during manual operation.
Ensure that nobody is at risk during manual operation of the ma-
chine.
Keep a safe distance away from the CMM during automatic mea-
surement runs.
Summary of Contents for CONTURA
