Safe operation of the CMM
61211-1310402
CONTURA
2-7
Requirements for safe use
Reading the documentation
Proper use of the CMM is essential for safe measuring operations. It is
assumed that you are familiar with the documents included in the deliv-
ery package. Read the CMM documents.
Requirements
In order to ensure safe operation of the coordinate measuring machine
(CMM), certain requirements must be met.
1
Ensure that the operating instructions for the CMM and the optional
equipment are always available at the CMM.
2
Follow the generally recognized accident prevention regulations and
safety instructions.
3
The CMM may only be used outside explosion-proof areas.
4
The CMM may only be used indoors.
5
Comply with the ambient conditions.
6
Wear clothing suitable for the work.
7
Do not exceed the maximum permissible workpiece weight.
8
Ensure sufficient illumination when operating the CMM.
9
Operate the CMM only with the protective devices provided for that
purpose.
Do not remove any covers, protective equipment, or warning signs.
10
Do not conduct routes through the working area.
11
Delimit the working area.
12
Carry out a visual check before start-up.
13
Use only power cords and connectors that are in perfect condition.
14
Insert the power connectors only in sockets equipped with a perfect
protective ground connection.
15
Clean the measuring table and the workpiece.
16
Clamp the workpiece onto the measuring table.
17
Do not exceed the measuring volume.
18
Always keep the control console within reach in order to be able to
press the
EMERGENCY STOP button
in cases of emergency.
19
Perform a homing run.
20
Read the notes regarding the end of the measuring operation.
Summary of Contents for CONTURA
