Zeiss CONTURA, Operating Instructions Manual

Page: 103 / 158

Safety during the measuring operation
61211-1310402 CONTURA
7-7
Precautions
Automatic measurement runs
Collisions due to measurement runs that have not been tested
Damage to the CMM and workpiece.
—
Test measurement runs at reduced travel speed before starting them
at maximum speed.
The travel speed can be reduced using the control knob on the con-
trol console or in the measuring software.
Magnetic effect
Magnetic effect of workpieces, clamping devices, and probes
Data loss, e.g. on diskettes and credit cards
— Keep data carriers away from magnetic materials.
Liquids
Faults due to liquids in electrical equipment
Impairment of the CMM function.
—
Keep liquids away from the CMM to exclude unintentional penetra-
tion of liquids into the electrical equipment.
Radio signals
Interference caused by radio signals
Malfunctions of the CMM
— Do not use any cell phones or walkie-talkies within a radius of 3 m
around the CMM.
Lateral styli
Collision of laterally projecting styli with the cover or the
changer rack
Damage to the stylus
—
Ensure that there is no risk of collision between the styli and parts of
the CMM.
Faults due to vibrations and shocks
NOTE
Vibrations and shocks may impair the function of the CMM.
Possible causes of vibrations are for example: