6
Changing the Mount of a ZEISS CP.3 Lens
In this chapter you learn how to change the mount of a ZEISS CP.3. The procedure consist of
two parts which are both mandatory to successfully change a mount. You learn how to detach
the currently attached mount and how to attach a different mount. To make sure the ZEISS CP.3
works properly, additionally complete the subsequent procedure:
Adjusting a ZEISS CP.3 to your Digital Camera.
Detaching a Mount
You need
ZEISS CP.3
ZEISS T6 torx wrench with a torque of 0.4 Nm
alternatively: regular T6 torx wrench with a torque of 0.4 Nm
ZEISS Interchangeable Mount Set for ZEISS CP.3
T
he use of tools offered by ZEISS is highly recommended. You can purchase these tools directly from ZEISS
or your trusted ZEISS dealer. See
Mount Change Accessories
Requirements
Ensure that your working space is flat and leveled, in order to prevent the lens from tilting and falling over.
Ensure that the environment is clean and free from dust so that no dust particles enter the ZEISS CP.3.
Ensure that the front lens cap sits on your ZEISS CP.3, in order to avoid scratches.