Zeiss cinemizer OLED, Safety And Operation

Page: 3 / 28

3
Cleaning the head tracker
Before you clean the head tracker, disconnect the USB connection. The
head tracker is only to be cleaned using a dry cloth, liquids and cleaning
agents are to be avoided.
Approval regulations Europe
The head tracker left the factory in perfect working order. It meets the
requirements for electromagnetic compatibility as per the directive
2004/108/EC and carries the CE mark. The device may shut down in case
of electrostatic discharge. In this case it can be operated again by swit-
ching it back on.
Approval regulations USA and Canada
This device complies with part 15 of the FCC regulations and complies
with all requirements of the Canadian regulations on interference-
causing devices (ICES-003). The limits are intended to provide adequate
protection against harmful interference during operation in residential
areas.
China ROHS
Disposal
Do not dispose of the head tracker in household waste, instead dispose
of as per the statutory regulations applicable in the related country. If ne-
cessary obtain information from the local authorities on the options for
disposal and recycling.
Warranty
The product is subject to the statutory warranty requirements of 24 months
in the EU, 6 months in the USA. The warranty in other countries may
vary from the information stated above. Damage or problems caused
by opening the head tracker are excluded from the warranty.Before you
make a claim under the warranty, please make sure the problem is not
due to incorrect operation. For this purpose read the support information
at www.zeiss.com/cinemizer/support
If you still have questions, or your problem is still unresolved, please
contact the cinemizer support team. To contact the support team please
click “Contact“ at www.zeiss.com/cinemizer/support