Zeiss Axiocam 202 mono, User Manual

Page: 37 / 52

6 On Screen Display (OSD) menu | 6.3 Settings menu ZEISS
No. Name Description
1
Reflector / FL Modules
button (for Axiolab 5, Ax-
ioscope 5/7 and Axio-
scope 5/7)
Opens a drop-down list to define the item installed at
the reflector turret's current position.
2
Objectives button (for
Axiolab 5, Axioscope 5/7
and Axioscope 5/7)
Opens a drop-down list to define the item installed at
the objective turret's current position.
3
Shading Correction but-
ton
Opens a menu to define the shading correction for
each combination of reflector, objective and light
source, see
Applying Shading Correction [
}
37] .
4
Configuration Wizard
button (for Axiolab 5, Ax-
ioscope 5/7 and Axio-
scope 5/7)
Opens a wizard to support you in setting up all micro-
scope configurations listed above.
5
Camera Adapter button
(for Axiolab 5, Axioscope
5/7 and Axioscope 5/7)
Opens a menu to define the camera adapter being cur-
rently used.
Please note:
For recommended adapters, see
Mounting the camera
to the microscope [
}
24] .
6.3.2.1 Applying Shading Correction
Follow the subsequent instructions to define the shading correction for a combination of reflec-
tor, objective and light source:
1
2
Fig. 11: Shading correction menu
1. Move in the reflector module and the objective to be configured.
2. Turn on the light source to be configured.
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 37