5 Connecting the Camera | 5.4 Function indicator
ZEISS
3. Connect the other end of the USB 3.0 cable to the USB 3.0 interface of the main board
(and not USB 2.0) or the recommened USB 3.0 PCIe interface card.
4. Switch on your PC if its not switched on already. The camera is ready for use.
Info
Power is supplied to the camera via the USB 3.0 interface. If you switch off the PC, the camera
is also switched off.
5.4 Function indicator
After you have switched on the PC, the LED on the camera will light up red. As a rule, if the LED is
red, this indicates that power is being properly supplied to the camera via the data cable. How-
ever the driver has not yet been installed. For the definitions of the LED color signals, refer to the
list below:
Signal
Meaning
Red
Power supplied; no driver loaded, camera not detected
Green flash 3x
USB 3.0 connection detected
Green
Driver loaded; camera ready
Off
No power supplied
Instruction Manual ZEISS Axiocam 105 color | en-US | Rev.2 | 426555-7010-001
14
Summary of Contents for Axiocam 105 color
Page 1: ...Instruction Manual ZEISS Axiocam 105 color Version R2...
Page 19: ......
