SET-UP
Carl Zeiss
Mounting the microscope
Axio Zoom.V16
20
435080-9030-701
05/2012
3.3
Mounting the microscope
Fig. 6
Mounting the microscope
All grub screws (SW 3) for fixing components should be unscrewed until they no longer project
into the inside diameter of the mount.
•
Remove the dust caps.
If the nosepiece is used, the threaded ring (Fig. 6/
8
) on the front lens of the microscope body
must be removed. To do this, unscrew the three captive socket head screws (Fig. 6/
13
).
•
Insert the body of the microscope (Fig. 6/
6
) into the mount (
∅
76 mm) of the carrier or nosepiece
9
), align it and hand-tighten it (Fig. 6/
12
).
For secure mounting, always hold the objective with both hands. Leave the protective cap on
the objective while screwing it in! Always store the objective in the special packaging.
Summary of Contents for Axio Zoom.V16
Page 1: ...Operating Manual Axio Zoom V16 Zoom microscope...
Page 2: ......
