17
Changing the lamp cable (optional)
AURA
®
handheld NIR - Rev. 2
EN_40_070_0030I | AURA
®
handheld NIR - Rev. 2 | Maintenance and Repair Manual
2
Disconnect the lamp cable from the circuit board
Release the lock of the connector
1
in slot
X600
2
on the
“FBG PowerBoard”
3
.
Pull the lamp cable from slot
X600
(see also “Fig. 10 Disconnect the lamp
cable from the halogen lamp” on page 16, item
4
).
Fig. 11
2
3
1
Disconnect the lamp cable from the circuit board
3
Install a new lamp cable
Carry out the previous disassembly work steps 1 to 2 in reverse order.
Lay the lamp cable below the optical opening of the detector (see red
dashed circle in “Fig. 10 Disconnect the lamp cable from the halogen lamp”
on page 16).
