Zeiss 000000-1080-349, Instructions For Use Manual

Page: 205 / 278

Version 7.0
G-30-1781-en
Page 205
S100 / OPMI pico Operation
Recording individual images and HD videos*
• Always check the following points (without the patient) before using the
device:
– The monitor is switched on.
– The network cable connection is established or a USB medium is con-
nected, is detected and has sufficient memory capacity.
– The correct profile was selected (see Page 187).
– The correct patient has been selected (see Page 178) or "Short Term
Memory Mode" is activated (see Page 188).
The name of the patient or "Short Term Memory Mode" (1) appears in
the header bar.
Creating individual images
• To creat individual images (photos), press the <Capture> button on the re-
mote control, the video unit, the foot switch (if configured) or the web in-
terface.
Recording HD videos
• To start video recording, press the <Record> button on the remote con-
trol, the video unit, the foot switch (if configured) or the web interface.
 During video recording, "Rec" (2), the duration of the recording (3)
e.g. 00:00:08 and the remaining recording time (4) e.g. (348:26:22)
appear in the footer bar. The "record" indicator light on the control
unit lights up with an amber color.
While recording a video the photo function (Capture) can be used to
create additional images.