Zeiss 000000-1080-349 Page 187 Instructions For Use Manual Download

Page: 187 / 278

Version 7.0
G-30-1781-en

Page 187

S100 / OPMI pico

Operation

Profiles

You can select the current profile in the "Profile" tab.

Fig. 83: Profiles

Active profile
A profile can be selected in "Active profile". Every profile can be renamed
and reset.

Rename Profile (Rename):
• Select the <Rename> button.



A virtual keyboard is displayed. This virtual keyboard can be used to
rename the profile (max. 15 characters).

• You can select the characters using the control keys

. Use the <En-

ter> or

to adopt the selected character.

• You can delete a character by pressing "Delete".

• Press "OK" to accept a change. You can cancel the action by pressing

"Cancel".

Reset profile:
• Select the <Reset> button.

• Confirm the warning message with "OK" to reset the profile.



The profile is reset to factory settings.

Summary of Contents for 000000-1080-349























































































































































































































































































Search results

Summary of Contents for 000000-1080-349

Reviews:

Related manuals for 000000-1080-349

Brands by name

Popular brands

Zeiss 000000-1080-349, Instructions For Use Manual

Search results

Summary of Contents for 000000-1080-349

Reviews:

Related manuals for 000000-1080-349

Brands by name

Popular brands