Zeiss 000000-1080-349, Instructions For Use Manual

Page: 156 / 278

Operation S100 / OPMI pico
Version 7.0
Page 156 G-30-1781-en
HDTV sub menu
The "HDTV MODE" sub menu allows you to select the video camera's input
signal and adjust it to your display device.
720P Select this setting format if your display device is 720p compatible. This mode
is similar to the 1080p progressive standard, but its maximum resolution is
only 1280 x 720 pixels.
1080P*
Select this setting if your display device is 1080p compatible. The image is set
up using real full frames. This prevents any interline flicker, and the image is
sharply defined and stable. The maximum resolution is 1920 x 1080 pixels.
1080I* Use the 1080i (interlace) mode if your display device supports the 1080i
standard. The image is set up by two consecutive half images. The delayed
image setup can cause slight interline flicker. The maximum resolution is 1920
x 1080 pixels.
As a requirement, you should have connected the HD compatible OPMI pico
with a 1080p version and a 1080p or 1080i compatible display device. We
recommend the use of a 1080p compatible display device.