General information
Safety considerations
Receiving
Identifies the most serious hazards
which will result in severe personal
injury or death.
Signifies hazards that could result in
personal injury or death.
Used to identify unsafe practices,
which would result in minor personal
injury or product and property
damage.
Please follow standard safe
practices regarding the
handling, installing or servicing
of mechanical equipment.
Read these instructions
thoroughly and follow all
warnings or cautions attached
to the equipment. Consult local
building codes and the National
Electrical Code(NEC) for special
installation requirements.
Understand the signal words:
danger, warning and caution.
Upon delivery, examine each unit
carefully for shipping damage.
Any damage should be reported
to the freight carrier and a claim
should be filed with them. Ensure
the shipping company makes
proper notation of any shortages
or damage on all copies of
the freight bill. Concealed
damage not discovered during
unloading must be reported to
the shipping company within 15
days of receipt of the shipment.
All units are shipped F.O.B.
factory. Therefore, Zehnder
Rittling is not responsible for
damage during transit. It is the
responsibility of the installing
contractor to inspect and verify
that the unit shipped was in
fact the correct model number,
voltage, etc. Any discrepancies
The manufacturer assumes
no responsibility for personal
injury or property damage
resulting from improper or
unsafe practices during the
handling, installation, service or
operation of the equipment. The
installation of fan coils and all
associated components, parts
and accessories shall be in
accordance with the regulations
of all authorities having
jurisdiction and must conform
to all applicable codes. It is the
responsibility of the installing
contractor to determine and
comply with all applicable codes
and regulations.
should be reported to the local
Sales Representative for immediate
resolution prior to uncrating and
installation. The factory should be
notified of any warranty repairs
required in writing before any
corrective action is taken. The
factory must be fully informed of
the expected costs before the
work is begun. Zehnder Rittling is
not responsible for any repairs or
alterations made by the purchaser
without Zehnder Rittling’s written
consent and will not accept any
back charges associated with
these repairs or alterations. The
return of damaged equipment will
not be accepted without written
authorization from Zehnder Rittling.
A unit that has received a written
Return Goods Authorization will be
inspected by Zehnder Rittling upon
receipt. Any damage, missing
parts, reworking or re-crating
resulting from prior installation
will constitute just cause for
Zehnder Rittling to issue partial
credit.
Several components are shipped
loose for field installation and
to offer added protection during
shipment and job site storage.
These items may include:
thermostats, supply grilles,
return air access doors, risers,
etc.
11
