En
gl
ish
-10-
Select Switch
Select the switches with which you want to
configure the antenna.
These switches relating to the antenna selection
and you can select maximum 16 antennas with
the combination of these switches.
For example, if you have 4 antennas, you can
assign Antenna 1 for 14 volt and 0 KHz, Antenna
2 for 14 volt and 22 KHz, Antenna 3 for 18 volt
and 0 KHz and Antenna 4 for 18 volt and 22 KHz.
If you have only one antenna, select all of the
switches as None.
Select Satellite
Select satellite name among the pre-
programmed list. You have to select proper
satellite considering installed antenna
direction and switch selection.
Note
:
DX 2000
can store maximum 31
satellites
Select Antenna Number
Select the antenna number to which you want to
place your desired satellite.
These number is relating to the stored antenna
selection table and you can select one of 16
antenna numbers to which your satellite will be
assigned.
Most important antennas have been predefined in
ANTENNA SETUP menu.