30
Ŷ
2ODBHjB@SHNM@BBNQCHMFSN#(-
5#$)82S8WW
6. Attach the device (B) (with the
CDRHFMEQ@LD7@MCSGDQDRHYD
window D) with the screws E to
the frame A.
7. Push the cover C into its place.
To replace, use any of the following
screws:
Ŷ
'@QCDMDC@MCF@KU@MHYDCRSDDK
RBQDVW/3
Ŷ
M2.2x 12 cross recess plan
OK@RjW¦
5
Commissioning
DE
17:00
Turn ON the main power of the ventilation
unit. The device displays a sequence of
RS@QSTORBQDDMRCHQDBSKX@ESDQONVDQHMF
up. Each screen is displayed for 1 second.
3GDRDPTDMBDNERS@QSTORBQDDMR
1.
KKHBNMR@QDCHROK@XDC@SNMBD
2.
2NESV@QDUDQRHNMHRCHROK@XDC
3.
3GDSDWS/.6$1HRCHROK@XDC
4.
3GDSDWS.*HRCHROK@XDC
5.
3GDSDWS".,,HRCHROK@XDC
6. The communication status is
displayed.
1. Press
. The display shows
BOOST.
2. Press
or
to choose RESET.
3. Press
.
4. Press
or
SNBGNNRD*$$/
5. Press
SNBNMjQL
6. Display shows DONE.
Reset all settings and timers of the
A@RHBLDMT@MCCDKDSD@KKOQNFQ@LLDC
schedules. The device resets all settings
to the factory defaults.
1. Press
. The display shows
BOOST.
2. Press
or
to choose RESET.
3. Press
.
4. Press
or
SNBGNNRD#$+
5. Press
SNBNMjQL3GDCHROK@X
shows DONE.
4
Installation
Disconnect the ventilation unit from the
L@HMONVDQADENQDHMRS@KKHMFSGDCDUHBD
Always follow local safety regulations.
#TQHMF@RRDLAKXDMRTQDSG@S ++
screws are tight.
jF
1.
SS@BGSGDV@KKLNTMSHMFB@RHMF
(if ordered) I with the plugs H and
screws G to the wall.
2. Fasten the wall frame A with the
RBQDVR%NMSGDV@KKV@KKLNTMSHMF
casing (I) or mounting plate (E).
3.
/TSSGDBNLLTMHB@SHNMB@AKD
SGQNTFGSGDV@MSDCCDRHFMEQ@LD7
@MCQDRHYDVHMCNV#
4.
/KTFHMSGDBNLLTMHB@SHNMB@AKD
jFSNBNMMDBSSGDUDMSHK@SHNM
unit and the device.
5.
3GDB@AKDQDPTHQDLDMSR@QD
Ŷ
2x twisted pair, unshielded,
OQDEDQ@AKXHMBNLO@SHAKDBNKNTQR
with the colour coding of the
BNMMDBSNQRNMSGD'14
Ŷ
2SHEERNKHCVHQDRMNSkDWHAKD
SXODENQOTRGHMBK@LOR
