16 - EN
3
4
5A
≥ 6 sec.
Set the desired settings for all the RF-signals
in the ADVANCED user menu:
1. If needed: Activate ADVANCED MODE.
- Select SHIFT
- Select ADVANCED
2. Navigate to ADVANCED SETTINGS
3. Navigate to RF SETTINGS
Navigate to menu START on the ComfoSense
C display:
1. Navigate to the ADVANCED SETTINGS
menu.
- Press OK.
- Press MENU before the text SHIFT
disappears.
2. Navigate to the RF PAIRING menu.
You have 10 minutes time to commission one
RF device.
RFZ:
Press button “1” & and button “
”
together for at least 6 sec.
Timer RF:
Press the button “10 min.” &
button “Timer OFF” together for at least 6
sec.
5B
≥ 8 sec.
6
CHANGED
SAME
#4
CO
2
RF main control:
1. Press the button for at least 8 sec.
2. Set the RF SENSOR PRIORITY menu
(settings advice: AUTO ONLY).
3. Set the RF SENSOR FUNCTION menu
(settings advice: FLOW_PROPORTIONAL).
See the user manual for more details
about the settings.
CO
2
RF upgrade sensor:
Press the button for at least 8 sec. using a
pointed object (paper-clip or pen).
Test the control after programming.
Change the air flow rate of the unit (see the
unit’s display): Registering successful.
Do not change the air flow rate of the unit
(see the unit’s display): Return to step 3.
Each RF control must be registered separately.
So for each extra RF control, return to step 3.
