EN - 17
6.4 RF controls
To enable the use of RF controls, the unit needs to be equipped with an RF PCB. The RF PCB has to be ordered separately
and can be installed later on.
1
2
3
If RF ACTIVATION is set to ON:
Set the
RF ACTIVATION on the display of the
unit to OFF. (MENU>SERVICE MENU>RF
SETTING>ACTIVATION>OFF)
The power will now be removed from the RF
PCB.
Set the RF ACTIVATION on the display of
the unit to ON. (MENU>SERVICE MENU>RF
SETTING>ACTIVATION>ON)
You now have 10 minutes to register the RF
control.
Set METHOD on the display of the unit to
DISCRETE CONTROL (MENU>SERVICE
MENU>RF SETTING>METHOD>DISCRETE
CONTROL)
4
≥ 6 sec.
CHANGED
SAME
#1
RFZ:
Press button “1” & and button “
”
together for at least 6 sec.
The airflow rate of the unit changes (see the
unit's display): Registering successful.
The airflow rate of the unit does not change (see
the unit's display): Return to step 1.
Each RF control must be registered separately.
For each extra RF control, return to step 1.
