4.1.4
Filter Status
If the Filter status within the “Service Log” is showing as 0 days the filters will need to be replaced
(See
Sections 4.1.8 CA155WM, 4.1.9 CA155CM and 4.2.0 CA185WM)
.
•
Press control button to activate panel
•
Scroll to “Service Menu” option and press button to enter
•
First option is the “Service Log” which indicates the number of
logs for review
•
Scroll to “Filter Change” option and press button
•
The request to reset timer will flash
•
Press to confirm
•
Screen will time out after 30 seconds
4.1.5
Heat Exchanger Status
If the Heat Exchanger status within the “Service Log” is showing as 0 weeks the heat exchanger will need to
be replaced
(See Section 4.2.1 CA155WM, 4.2.2 CA155CM and 4.2.3 CA185WM)
.
•
Press control button to activate panel
•
Scroll to “Service Menu” option and press button to enter
•
First option is the “Service Log” which indicates the number of
logs for review
•
Scroll to “H/Exch Change” option and press button
•
The request to reset timer will flash
•
Press to confirm
•
Screen will time out after 30 seconds
Note: If you clean your heat exchanger during the period, do not adjust the timer.
4.1.6
Run Time
To review the length of time your unit has been in operation:
•
Press control button to activate panel
•
Scroll to “Service Menu” option and press button to enter
•
Scroll to "Runtime - Days" option to review
(time shown in days)
•
Screen will time out after 30 seconds
4.1.7
Software Identification
To review what software version is activated on your unit:
•
Press control button to activate panel
•
Scroll to “Service Menu” option and press button to enter
•
Scroll to “Software” option to review
•
Screen will time out after 30 seconds
C H A N G E
F I L T E R
< 3 6 5 d >
C H A N G E
H / E X C H
<
1 0 w >
R U N
- D A Y S
T I M E
[
7
0
3 0 ]
S O F T W A R E
[ v
.
1
9 ]
8
