2
1. General
1.1 Application
This operating instruction is valid for
t
he pumps of the DRAIN-INOX 50 submersible motor pump series
Non-compliance with the operating instructions - in particular with the safety instructions - as well as non-manufacturer modification or use
of non-original spare parts will result in loss of guarantee coverage. The manufacturer accepts no liability for damage or injury resulting from
incorrect use of the equipment.
These dewatering pumps are designed for delivering of well contaminated water with particulate materials from private household, industry
and agriculture. The particle size must not exceed the mentioned size at ch. 1.3.
This product may also pass as any other electrical equipment in cause of lacking electrical supply. If you may get any damages thereby,
please calculate in accordance to the use an emergency power generator, a second pump and/ or a network independent alarm system. As the
manufacturer we will be at your disposal after the buying for near information. In cause of defects or damages please contact your retail
trader.
Instruction last modified
: 0
9
/20
20
1.2 Queries and Ordering
For queries and orders please contact your authorised retail trader.
1.3 Technical data
Typ:
Drain Inox 50 MA
Input power P
1
450
W
Voltage / frequency
230 V / 50 Hz
Nominal current
2
A
Nominal speed
2800 U/min
Power cable
10 m, 3 x 1 mm²
max. capacity
90
00 l/h
max. head
8
m
max. particle size
10 mm
Pressure size
G 1
¼
“ IG
Weight
4,0
kg
Height over all
270
mm
Diameter
1
70
mm
max. liquid temperature
35
°C (temporary
75
°C)
Float switch
yes
Materials
Pump body
Stainless steel
Outer housing
Stainless steel
Strainer
Stainless steel
Motor housing
Stainless steel
O-rings
Float switch
Seals
NBR
PP
Carbon/ Ceramics
Motor shaft
Stainless steel
GB
B
