Page 4
|
HDbridge 2312 Configuration Guide
www.zeevee.com
HDbridge 2312 Configuration Guide
|
Page 5
Front and Back Panels
Factory default settings allow HDb2312
series modulators to broadcast up to 12SD
sources on RF channels 2, 3, 5, and 6 for
reception at connected HDTVs.
We recommend using the most updated
version of firmware. You can find the latest
version on the Support section of our
website.
Beginning setup
1.
Apply power.
2.
Connect a Composite Video source to any
Composite Video Input of the HDb2312.
3.
Connect the Analog Audio.
Tuning your channel at the HDTV
(Auto Scan)
1.
Connect the Coaxial Output of the HDb2312 to
your RF network.
If the RF power for your network
is too high, you will observe video breakup.
2.
Specify Cable (not Air or Antenna) setting in your
TV menu.
3.
Enter the RF number to tune directly to the
channel. For default channel lineup information,
refer to the Default Channel Lineup table.
If you
cannot tune directly to the channel at this point, it is
because most TVs will require you to run a full Auto
Scan.
4
. Run the Auto Scan through the menu system of
your HDTV to find the channels.
Basic Installation
HDb2312
Name and description of unit
Color Display
Configuration and system status
5-Way Control
Navigate options on front panel display
Coax Output
Up to 2 paired, frequency-agile QAM RF CATV output channels for up to
12 video sources. Output power can be set b45 to +25 dBmV
using the Maestro web interface or the front panel.
Audio/Video Inputs
Video: Composite
Audio: Analog 3.5mm
Event Detection
This function not implemented yet
10/100 LAN Port
Two symmetrical Ethernet ports for configuration and remote management
Delay Matched Audio Output
For matching audio to external audio system (first port only)
AC Power Input
100-240VAC / 50-60Hz
S
D Card Port
This function not implemented
DEFAULT CHANNEL LINEUP
(HDb2312)
AV Input
RF
#
HDTV
Channel
AV Input 1
2
2.1
AV Input 2
2
2.2
AV Input 3
2
2.3
AV Input 4
3
3.1
AV Input 5
3
3.2
AV Input 6
3
3.3
AV Input 7
5
5.1
AV Input 8
5
5.2
AV Input 9
5
5.3
AV Input 10
6
6.1
AV Input 11
6
6.2
AV Input 12
6
6.3
Video Source
Back of HDb2312 Modulator
RF Output
+45 dBmV
Analog
Audio
Composite
Video
Composite
Video Source
Ethernet to network or
directly to computer
Optional Delay Matched
Analog Audio Out to
audio system
WARNING: +45 dBmV
Do not connect directly to HDTV
Coax cable connects
to coax network
