3.
Power on & reset
：
Insert the battery; the LCD is fully displayed for 3 seconds, while the BI
enters into the standard mode, and the backlight is on for 5 seconds.
Default Display:
Time
：
12:00 AM
Date
：
2017.JAN.01 SUN
ALARM
：
6:30 AM OFF
NAP time
：
10minutes
4.
Timing setting
：
In the standard mode, press the
“
SET
”
button for 2 seconds to enter the
time setting, and the set unit will flash at 1HZ frequency.
Then press “set”button step by step
：
language
BEEP ON/OFF
Time zone
12/24HR
hour
minute
year
month
day
temperature
SNZ time
Exit
During the setting process, press
“
UP
”
button once to set the value plus
1; long press to set the value to increase at 8 steps/second.
During the setting process, press the
“
DOWN
”
button to decrease the
value by 1; long press to decrease the value at 8 steps/second.
Setting is completed, single-press
“
SET
”
button or 20 seconds without
pressing any button to exit setting mode
In the setting mode, press the
“
SNZ/LIGHT
”
button to exit the setting
mode directly.
When BEEP (key tone) is set, press
“
UP
”
or
“
DOWN
”
to select ON/OFF
SNZ time setting range: 5~120 minutes, one unit every 5 minutes, default
10 minutes
time zone setting range: -12 ~ +12
5.
Alarming setting
In the standard mode, press the
“
ALARM
”
button to view the AL alarm
time.
When viewing the time, press the
“
ALARM
”
button to turn the alarm on
or off.
In the standard mode, press the
“
ALARM
”
button for 1 second to enter
the alarm setting, and the set item will flash at 1HZ frequency.
Press the
“
ALARM
”
button to set the order: hour
minute
exit
During the setting process, press
“
UP
”
button once to set the value plus
1; long press to set the value to increase at 8 steps/second.
During the setting process, press the
“
DOWN
”
button to decrease the
value by 1; long press to decrease the value at 8 steps/second.
Setting is completed, single-press
“
ALARM
”
button or 20 seconds
without pressing any button to exit setting mode
In the setting mode, press the
“
SNZ/LIGHT
”
button to exit the setting
