- 1 -
www.zeeltronic.com
[email protected]
updated 11.10.2008
program version: 000.
011008
USER MANUAL
VCDI-22 DIGITAL IGNITION CONTROL UNIT
TECHNICAL DATA
Limit values:
- minimum revs
200 RPM
- maximum revs
20000 RPM
- minimum supply voltage
8 Volts
- maximum supply voltage
20 Volts
- max. supply voltage for 1 minute
40 Volts
- current draw
25 mAmp
- maximum continuous current for shift light output
1 Amp
- peak current for shift light output
5 Amp
Circuit is protected against reverse supply voltage (wrong connection).
Features:
- 2 channel isolated input (pickup)
- store and load function for two ignition curves
- Solenoid output (ATAC exhaust valve)
- shift light output
- quick shift (shift kill)
- three stage rev limit (retard timing, reduced spark, spark off)
- external switch for changing ignition map while riding
- tachometer output
- easy and fast programming on the field, via hand held programmer
- programming while machine running - you can immediately see effects
- each curve can be set in 4 to 12 curve points
- signal delay compensation
- instant monitoring of rev's and angle, via LCD(hand held programmer)
- fast processing for high accuracy - delays from 1us
- timing calculation for every 1 RPM change (1000, 1002, .. , 9805, 9806, ...)
Very important!
Resistor spark plugs, or resistor spark plug caps must be used, because they produce less
electromagnetic disturbances.
