Zeegma Zonder Robo Next, User Manual

Page: 12 / 100

EN
PROBLEM POTENTIAL CAUSE SOLUTION
The vacuum cleaner
does not charge.
No connection with the
docking station.
Make sure charging ports of the vacuum cleaner and docking
station are properly connected. Try to place the product on
the docking station manually.
The battery does not charge. Make sure the docking station is plugged in. If you have not
used the vacuum cleaner for a long time and battery does
not charge, place the cleaner on the docking station and
charge for 3 minutes, then stop charging. Repeat 3 times
and then start charging the vacuum cleaner normally.
The vacuum cleaner
has difficulties in
vacuuming.
The vacuum cleaner wraps in
elements of the room (cables,
drapes, etc.).
The vacuum cleaner tries to steer clear of obstacles. If it
is impossible, remove obstacles before you start another
vacuuming.
The vacuum cleaner
returns to the
docking station
automatically.
Low battery. This operation is normal.
End of work time. This operation is normal.
The vacuum cleaner
does not activate
during scheduled
vacuuming.
Vacuum cleaner is off Switch the vacuum cleaner on.
Low battery Charge the battery.
Dustbin is clogged or other
elements are obstructed.
Switch the device off and clean the dustbin and filters.
Remote control does
not work
Batteries in remote control
are flat.
Replace batteries in the remote control.
The vacuum cleaner is off or
battery is low.
Switch the device on and/or charge the battery.
Infrared signal is not received
by the device.
Clean the infrared sensor on the device and remote control.
Check the space between the remote control and device for
any obstacles blocking the signal and other items emitting
infrared signal (e.g. TV remote control).
APPLICATION
1. Download and install „WeBack” application (see fig. 16)
•
Scan QR code or find „WeBack” application in GooglePlay store or iOS store, download
it and install.
2. Sign up/ log in (see fig. 17)
•
Enter the application, enter your phone number or e-mail address. Enter your password
to receive the verification code. Next read and accept the Privacy Policy.
•
Enter the verification code in the empty field. Go further.
•
Next log in the application by entering the correct phone number or e-mail address
and password.
3. Scan the vacuum cleaner with QR code (see fig. 18)
•
Log in the application, click „+”, scan QR code on mobile device and click „enter
manually”.