Zeegma Knapper, User Manual

Page: 8 / 86

EN
5. Press the increase or decrease (3, fig. B) button to set the desired
operating temperature of the device. Pressing these buttons
causes a change of 5 degrees.
6. Press the shortening or extension (4, fig. B) button to set the
desired operating time of the device. Pressing these buttons
causes a change of 1 minute.
7. You can also use the 7 automatic programs for easy cooking -
ribs, fish, steak, pie, prawns, chicken leg or fries (6-12, fig. B).
Press the desired program in the display (2, fig. B) and then press
the switch. For information on programs, see the subsection
Automatic programs.
8. Press the switch to start the device with the selected parameters.
If there is no activity, the device will beep and switch off
automatically. During operation of the device, the light indicator
(13, fig. B) will flash.
9. When the device is in operation, do not approach the air outlet
(3, fig. A) due to the risk of burning.
10. If the bowl with the basket is ejected while the appliance is
running to stir the ingredients, it will stop its operation. To
resume the process, slide the bowl with the basket back into
the machine. Note! Do not press the basket release button (5,
fig. A) during this operation.
11. Slide the safety catch and then press the basket release button
(5, fig. A) to remove the basket from the bowl and transfer the
food being prepared to another dish.
Once the selected time has passed or the device has been switched
off, the device will start to cool down and then beep and stop.
In case of cold food, extend the operating time of the device by
approximately 3 minutes.
It is recommended to stir the ingredients in the basket every 7-10
minutes.
NOTE! The bowl and basket are very hot. Put down only on a heat-
resistant surface. Remove from the body of the device by holding
the handle.