MANUAL
3
4
ENGLISH
CONTENTS
∙
Wall hanger (ASA)
∙
Connector (ABS)
∙
Connector with water stop (ABS)
∙
3 x adapter: ½”, ¾” and 1” (ABS)
∙
Spray gun (ABS)
∙
Nozzle (ABS)
∙
3 x screws and plugs
∙
20 m hose (PVC = REACH compliant)
INSTALLATION
01. With the wall hanger, mark the
points where you will have to drill
the holes.
02. Drill the holes 4 cm deep with a
Ø 5 mm drill.
03. Insert the plugs.
04. Place the wall mount on the plugs
and screw tight.
ATTENTION
→ Tighten screws with a manual
screwdriver.
→ If the screws are screwed too tight
using an electrical screwdriver/drill,
the wall mount can crack.
LET’S FEED
LET’S CLEAN
LET’S PLAY!
Ø 5 mm
ATTENTION: TIGHTEN SCREWS WITH A MANUAL SCREWDRIVER.
IF THE SCREWS ARE SCREWED TOO TIGHT USING AN ELECTRICAL SCREWDRIVER/DRILL,
THE WALL MOUNT CAN CRACK.
INSTALLATION
SIDRA
