18
OUT
IN
MONITOR
- 6dB
Subwoofer connector panel
Attenuator switch for TW 6 TOP M
Use this button to attenuate the
level of the TW6TOPM satellite by
6 dB. Lowering the level of this satel-
lite can be useful when it is used as a
monitor.
Monitor output
This Speakon output allows to connect
the TW 6 TOP M satellite cabinet via a
TWK 10 SP/KL adaptor cable (available as
an accessory) when it is used as a floor
monitor.
Connecting and disconnecting
The cabinets of the Twister system are
equipped with four-pole Speakon connec-
tors. These connectors have a locking mech-
anism that protects the cables from being
pulled by accident. After insertion (1.), the
plugs have to be turned counterclockwise a
quarter turn (2.) until they snap into locking
contact postion.
When unplugging the cabel, first pull back
the locking latch (1.). While holding the latch,
turn the whole plug counterclockwise (2.)
and pull it out of the socket (3.).
Connecting
Disconnecting
Speakon connectors
Input connector
Use this Speakon input to connect your TWISTER
system to an amplifier or power mixer.
Required wiring for Speakon plug (seen from
terminal side of Speakon plug):
2+
2-
1-
1+
TWISTER 12.6 P
TWISTERMIX
Ground
Signal
2+
2-
1-
1+
TWISTERAMP
Ground
Subwoofer
Satellites
Ground
1.
2.
1.
3.
2.
Twister_Manual_D_GB.indd
12.12.2000, 09:39
18-19
