CL 8 CT
4 channel light controller
owner´s manual
Dear customer,
thank you very much for purchasing the
STAC CL 8 CT
light controller. The
STAC
CL 8 CT
light controller is an easy to operate multi function 4 channel chaser
and sound to light unit. The
STAC CL 8 CT
is designed for mobile and perma-
nent installation on stages and in discotheques. It features 4 x 1kw outputs wich
are individually fused, sound input with automatic gain control, full sound to
light, soft chase, 32 patterns, auto patterns, output dimming and can be selected
to work either 3 or 4 output channels.
Study the following instructions carefully. We are not liable for any
damage or injury resulting from disregarding the instructions.
This unit must only be used for its intended purpose.
1. Connections
Mains Input:
The unit comes ready for you with fitted mains plug.
Make sure that the unit is earthed throught the protective-earth contact on the
three-pong mains connector and that during the operation of this unit, the total
load does not exceed the capabilities of the mains supply.
Outputs:
The outputs of the unit are presented on two Bulgin connectors, connections as
follows:
1 - Earth
2 - Channel 4
3 - Channel 3
4 - Channel 2
5 - Channel 1
6 - permanent mains
7 - Lamp common
8 - Lamp common
The lamps are wired between a channel output and one of the lamp commons.
The cable used should be of an adequate size to handle the lamp load.
Sound input:
The
STAC CL 8 CT
has a 6,3mm mono jack socket for connection across a spea-
ker or line output. Next to the jack socket is an adjustment for the sound level.
