Hydro-Wiper Installation and Operation Manual
| 13 |
7.
Troubleshooting
Wipe failure
Should the wiper arm jam during a wipe due to an obstruction, it will attempt to dislodge
itself by undergoing a series of direction reversals. If unsuccessful, the wipe will be aborted,
and the LED will blink 3 times every 15 seconds until the next wipe is due.
NOTE!
The Hydro-Wiper is not damaged in the event of the wiper arm becoming
completely jammed by an obstruction.
NOTE!
The LED indicator will blink twice every 15 seconds when the Hydro-Wiper
has failed to complete the last scheduled wipe.
Low battery shutdown
Low battery shutdown occurs when the battery pack reaches around 6.5 volts. No wipes
will be performed when the Hydro-Wiper is in low battery shutdown mode.
NOTE!
The LED indicator will blink three times every 15 seconds when the Hydro-
Wiper is in low battery shutdown mode.