Zebex Z-6910, Programming Manual

Page: 10 / 315

Omnidirectional Laser Scanner 2
P
ROGRAMMING
G
UIDE
INTRODUCTION
This is an advanced programming guide for varies omnidirectional laser scanners.
This guide contains a series of programming barcode labels, and by scanning
these codes, it can make configurations to the scanners. This allows decoding
options and interface protocols to be tailored to a specific application. The
configuration is stored in non-volatile memory and will not be lost by removing
power from the scanner. Other than specified in this guide, for any special
functions or specifications, please contact your dealer for details.
The scanner must be properly powered before programming. For RS-232C type
scanners, an external power adapter must be used to supply DC power to the
scanner. If a keyboard emulation type scanner is used with an IBM PC/XT/AT,
PS/2 or any fully compatible computers, power will be drawn from the keyboard
port; therefore no external power adapter is required. If keyboard emulation
type scanner is used with any other non IBM PC compatible computers, an
external power adapter may be required.
Under the programming mode, the laser scanner will acknowledge a good and
valid reading with a short beep. It will give long beeps for either an invalid or
bad reading.