Omnidirectional In-Counter Scanner
28
U
SER
’
S
M
ANUAL
Operation
LED Indications
There are red and blue dual color LED indications on the top of the device indicating the
operational status of the scanner.
LED Status
Indication
LED off
No power supplied to the scanner.
Steady blue light
The scanner is powered on and ready to scan.
One red flash
A barcode has been successfully decoded.
A barcode has been successfully decoded, but the
object is not removed from the scan window.
Steady red light
The scanner is in programming mode.
Flashing blue light
The scanner is in sleep mode.
Steady red/blue light
This indicates the scanner has a motor or laser failure.
For motor failure, a periodic beep is sounded. In this
case, return the unit for repair.
Flashing red light
The scanner is programmed in USB interface but not
connected to a host device.
Sound Indications
The device uses a speaker to give audio feedback on scanner operation. The beeper tone
and duration are adjustable with the Programming Guide. The following are the sound
indications.
Beeps
Indication
One beep
A barcode has been successfully decoded.
Two beeps: high-low
The scanner has entered programming mode.
Two beeps: same tone
Scanner has returned from programming to normal
mode.
Four beeps in series
This indicates the scanner passed self-test when
powered on and is operating properly.
Continuous tone
This is a failure indication. Return the unit for repair.
