Dual-Laser Omnidirectional Scanner
15
U
SER
’
S
M
ANUAL
LED and Beeper Indications
LED Indication
There are red and green dual color LED indications on the head of the device. They indicate the
operational status of the scanner. The following are the LED statuses and their indications.
LED status
Indication
Off
No power supply to the scanner
Steady Red light
The scanner is on and ready to scan
Flash Green light once
A barcode has been successfully decoded
A barcode has been successfully decoded, but the object is not
removed from the scan window.
Steady Green light
The scanner is in programming mode.
Flash Red light
The scanner enters the sleep mode
Steady Red/Green light
This indicates the scanner has a motor or laser failure
For motor failure also with a periodic beeper is heard
Return the unit for repair.
Alternate flash Red and Green
light
This indicates the scanner detect a failure power.
Please check your power whether properly
Beeper Indication
When the scanner is in operation, the sound indicates the statuses as follows.
Beeper
Indication
One Beep
A barcode has been successfully decoded.
Series three Beep
1.)
This indicates the scanner passed the self-test and is
operating properly.
2.)
When the scanner is powered up.
Series two beep
This indicates when you’re going into programming
Continuous beep tone
This is a failure indication. Return the unit for repair.
Summary of Contents for Z-6070 Series
