background image

 

S

ERVICE  

G

UIDE

Preface 

 

Important Notice 

This equipment generates, uses and can radiate radio frequency energy. If not installed and used in accordance 
with the instructions in this manual, it may cause interference to radio communications. The equipment has been 
tested and found to comply with the limits for a Class A computing device pursuant to EN55022 and 47 CFR, Part 2 
and Part 15 of FCC Rules. These specifications are designed to provide reasonable protection against interference 
when operated in a commercial environment. 
 
For CE-countries: 
It is in conformity with the CE standards. Please note that a CE-Marked power supply unit should be used to 
conform to these standards. 
 
Radio and television interference 
 
Operation of this equipment in a residential area can cause interference to radio or television reception. This can be 
determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or 
more of the following measures: 
 

  Re-orientate the receiving antenna 

  Relocate the device with respect to the receiver 

  Move the device away from the receiver 

  Plug the device into a different outlet so that the device and the receiver are on different branch circuits 

 
If necessary, the user should consult the manufacturer, an authorized dealer or experienced radio/television 
technician for additional suggestion. The user may find the following booklet prepared by the Federal 
Communications Commission helpful:

How to ldentify and Resolve Radio-TV Interference Problems

”. This 

booklet is available from the U.S. Government Printing Office, 
Washington, DC 20402, Stock No. 004000003454. 
 
No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of 
merchantability or fitness for a particular purpose. We are not liable for any errors contained herein nor incidental or 
consequential damages in connection with furnishing, performance or use of this material. 
 
No part of this document may be reproduced, transmitted, stored in a retrieval system, transcribed, or translated 
into any language or computer language in any form or by any means electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without express written consent and authorization. 
 
We reserve the right to make changes in product design without reservation and without notification. The material 
in this guide is for information only and is subject to change without notice. 
 
All trademarks mentioned herein, registered or otherwise, are the properties of their various respective owners. 
 

This manual is in A4 format. Please check your printer setting before printing it out.

Z-5160 Service Guide  

2 / 10

Summary of Contents for Z-5160











Reviews: