Zebex Z-3070/DC, Reference Manual

Page: 15 / 100

OUTLINE FOR PRODUCT REFERANCE MANUAL
Z-3070 CCD BARCODE SCANNER
Connecting the scanner to a host
The Z-3070 Series scanner supports RS-232C, keyboard Emulation,
Wand Emulation, and USB interface to a host system. This section
describes how to set up each of these connections.
RS-232C Connection
This connection is made either through RS-232C interface cable with D
type 9 Pin connector or through a RS-232C interface cable with D type 25
Pin connector to the serial port on the host.
1. Connect the RS-232C interface cable to the bottom of the scanner, as
described in Installing the interface Cable.
2. Connect the other end of the interface cable to the serial port on the
host.
3. Connect the power supply.
RS-232C Connection with D type 9 Pin connector
3w90 13.98 70/P16 Ocn 14 >>BDCBT/TT4 1 Tf13.9400 0 13.98 70.9198 137688 Tm( )4.698 0 0/SID 0/ <</MC5D 39 >>BDC/GS3 gs q286.3784 0 0 -112.74 130.92 458 cm/Im4 DoQEMC/13.986.024/P <</MCID 7 >>BDCBT/TT5 1 T23.98 0 0 13.98 70.9198 380.4823 Tm( )Tj13.9819.5006 Tm(This) >>BDCBT/TT5 1 T33.98 0 0 13.98 70.9198 364.4025 Tm( )Tj13.9803.48 0 Tm(This) >>BDCBT/TT5 1 T33.98 0 0 13.98 70.9198 348.3226 Tm( )Tj13.918 704serial port on the host.