ZEBEX INDUSTRIES INC.
Subject
Version
Date
Page
Z-2070 series User’s Manual
3.00
2010/1/26
27
/ 58
To scan a RFID
After opening Zebex RFID demo program, you will see main menu displayed
as below. There are three main functionalities such as “Read UID”, “RW
15693”, and “RW Mifare”. Please follow below steps to read UID.
Reading UID
1)
Select COM port to reading UID, default setting was COM5. Then confirm by pressing
“ Open Port ” button.
2)
Select UID type, then confirm by pressing “ Start ” button. Demo program provide three
UID types such as 15693, 14443A, and 14443B.
3)
User can also adjust scanning rate by selecting how many msec for scanning once. Then
confirm by clicking “ Timer ” button.
4)
After scanning UID, it will be shown on column at the bottom of display. Data in column
can be clear by pressing “ Clear ” button.
5)
COM port can be stop by pressing “ Close Port ” button.
6)
If user need to switch to another UID type, UID type by can be cancel by pressing
“ Stop ” button. Then user can select another UID type as demand.
RW 15693
On RW 15693 function window, user can read and write information from
RW 15693 UID card:
1)
Set up protocol by pressing “ SetProtocol “ button, place UID card within valid range and
press “ CheckUID ”button. The UID will display in the red circle of below diagram.
2)
To read data from certain Block, first input the location in column next to Read Block.
Then confirm by pressing “ Read Block ” button. Read Data will appear in column