– 18 –
– 19 –
5. zBP-1Pro coNNecTIoNs
1. RcA InPuts
Stereo RCA signal input for connection of the processor module with an RCA interconnect
going to the head-unit
2. RcA OutPuts
Stereo RCA signal output for connection of the processor module with an RCA interconnect
going to the amplifier
3. REMOtE cOntROL
Remote port, to connect the wire of the remote control
4. POwER InPut
4.1 GnD Power Input terminal
Terminal to connect the amp module to the power cable connected to the chassis ground or
the negative pole of the car battery
4.2 Remote Input terminal
Terminal to connect the amplifier to the wire going to the automatic (remote) turn-on / turn-off
lead of the headunit
4.3 +12V Power Input terminal
Terminal to connect the amp module to the power wire going to the +12V pole of the car
battery
5. wIDE knOB
6. swEEP knOB
7. stAtus LED
7
5
6
3
1
2
4
ZBP-1PRO Manual D+E.indd 19
21.08.2007 9:40:34 Uhr
