5.OPERATION INSTRUCTIONS
1.Inspect the winch rope, hook, and slings before operating the winch. Frayed,
kinked, or damaged winch ropes must be replaced immediately. Damaged com-
ponents must be replaced before operation.
2.Wrap the wire rope under 500 lbs. of tension before use. Otherwise, the wire
rope may bind during operation.
3.Ventilate the area well before and while working on the battery. Explosive
hydrogen gas can accumulate and explode when ignited by a spark or open
flame.
4. Remove all jewelry and metallic objects before working near battery.
Warning:
1.Read the entire Important Safety Information section at the beginning of this
winch.
2.The instructions that follow are basic guidelines only and cannot cover all
situations encountered during use. The operator and assistants must carefully
plan usage to prevent accidents.
Clutch Operation
1.The position of the pin in the shaft determines whether the clutch is engaged
or not.
2. How to change clutch position
a) Pull clutch knob out.
b) Turn it 90° while it is pulled out, then
release it.
10
Shaft
Pin
Drum
End
Shaft
Pin
Drum
End
If the pin rests
in the groove in the drum
the clutch is engaged.
If the pin rests
on top of the end of the
drum the clutch is released.
Summary of Contents for 2500LB
Page 1: ...ZEAK 2500LB WINCH ...
